Popular Posts

Monday 30 January 2012

Dry Type Transformer

Fire safety and environmental aspects are of increasing importance especially in respect of enerrgy supply.The substitution of oil filled transformers by dry type transformers is one of the most urgent thing to do. These transformers are used when it has to be located near load center and in a fire hazardous place.As there is no oil used in the transformer and special type of fire resistant insulation are used for the windings the fire risk is considerably reduced in this type of transformers. Dry Type Transformers are designed and tested to comply with National and International Standards IS/BIS/ANSI/IEC & IEEE.








Salient Features :
•  High impulse & dyanmic short circuit strength
•  Good overload capacity
•  Low partial discharges
•  Low Losses
•  No fire hazards
•  Well suited for populated areas and high rise buildings
•  High performance
Specifications :
•  Range : 630KVA-5000KVA upto 33KV class
•  Frequency : 50/60 Hz or as per requirement
•  Insulation : Class 'F'/Class 'H'
•  Tab Type : Off circuit tap links/On load tap changer
•  Enclosure : IP21/IP23/IP33/IP43/IP00
Advantages :

•  Less space and civil work needed
•  Maintenance Free
•  Low cost of installation
•  Longer life due to low thermal and dielectric ageing

Contact Us
L.D.Power Transformers Pvt.Ltd.
Manufacturers of Servo Voltage Stabilizers & Transformers
A-9,Sector 59 , Noida (India).
Fax No : 0120-4248043
T :0120-2586500 , 2580934
Email : ldpower@rediffmail.com

Tuesday 24 January 2012

Distribution Transfomers

ELDEE manufactures a wide range of distribution and power transformers ranging from 10KVA to 5000KVA with voltage class upto 33 KV.These transformers can be free breathing or hermetically sealed. Conventional transformers are fitted with a conservator with breather for free breathing while hermetically sealed ftransformers are totally maintenance free and are particularly suited for use in exposed outdoor environments such as moisture,salt or dust laden atmospheres. Ideal for chemical plants,oil and gas terminals where poor accessibility makes regular maintenance undesirable.both types can be supplied with HV and LV Switchgear incorporated into.substations.ELDEE manufactures conventional/hermetically sealed/bolted type,indoor/outdoor type,pole/platform mounted 3 phase,50/60 Hz,oil immersed,ONAN/ONAF/OFWF cooled, step up/step down,double wound with A1/Cu conductor.Optimum design for reliability, accuracy,low losses,specified performance characteristic such as impedance,temperature rise,efficiency, noise level and ability to withstand the thermal and dynamic effects of short circuits,lighting and switching surge are enxured.
Specifications :
•  Range : Upto 5MVA upto 33KV Class * Phase : Three Phase * Cooling : NOAN * Frequency : 50 Hz
•  Tapping : (a) Offcircuit tap changer to provide +5% to-10% taps in steps of 2.5% (b) On Load tap changer to provide + 7% to -20% taps in step of 1.75%
•  Vector group : DYN 11 * Duty Cycle : Continuous * HV Side Cable Box,LV Side Cable Box/Bus Duct
•  Core : The core is constructed from low loss,cold-rolled,grain oriented, annealed lamination
•  Copper : Electrolyte grade,99.9% pure
•  Reference standard IEC/BS/ANSI/IS/NEEMA
 Our transformers are tested as per IS 2026 and type tested by testing agencies CPRI,ERDA and RDSO.

Table 1 : Three Phase : 11/0.4333 KV,50HZ
Rating
KVA
NLL
(w)
FLL
(w)
%Z Temp. Rise Total
Weight(Kg.)
OIL
(Liter)
Dimensions
Length Width Height
25
63
100
200
315
630
990
1500
2000
80
180
260
500
1000
1300
1400
2100
2600
615
1235
1760
2800
4500
7500
11500
16000
20000
4.5
4.5
4.5
4.5
5
5
5
6.25
6.5
35/40
35/40
35/40
35/40
50/55
50/55
50/55
50/55
50/55
385
625
730
1000
1300
2450
3290
4550
4350
115
175
190
290
325
500
670
1050
850
910
1050
1180
1440
1800
2150
2350
3400
2650

700
930
850
1100
1450
1600
2250
2200
2500

1280
850
1425
1700
1850
2150
2400
2800
2600


Table 2 : Three Phase : 33/0.4333 KV,50HZ
Rating
KVA
NLL
(w)
FLL
(w)
%Z Temp. Rise Total
Weight(Kg.)
OIL
(Liter)
Dimensions
Length Width Height
990
1500
2000
2500
1800
2200
2950
3600
13000
16500
21500
26000
5.5
6.25
6.25
6.5
50/55
50/55
50/55
50/55
3700
5350
6150
9100
865
1100
1350
2700
2550
2450
2550
3000

2375
3200
3550
2800

2550
2900
2900
3000


Contact Us
L.D.Power Transformers Pvt.Ltd.
Manufacturers of Servo Voltage Stabilizers & Transformers
A-9,Sector 59 , Noida (India).
Fax No : 0120-4248043
T :0120-2586500 , 2580934
Email : ldpower@rediffmail.com


Monday 23 January 2012

Isolation Transformers


Home ... Products ... Isolation Transformers
 
 
Any transformer,single or three phase in which primary and secondary are separately wound (double wound) is an isolation transformer as primary and secondary are internally isolated from each other.The power transfer at rated frequency is by transformer action through mutual inductance. The Modern machines and systems need a truly is olated clean power in which any electrical disturbance in the priary side is effectively not passed on to secondary side.

Therefore an Isolation/Ultra Isolation transformer ensures total electrical and electro satatic isolation local neutral and dedicated earth which are very essential for modern machines.It provides noise or interference free power and prevents transfer & RF and HF disturbances with extensive isolation between primary and secondary.The isolation level with stand HV break down strength of 2.5KV and gives DC galvanic isolation of more than 1000M Ohms.

Technical SPECIFICATIONS 
Input
Acceptable Input Range
Output
System Construction
Rate
Vector Group
Common mode noise rejection
Transient,Spikes,Surges,Coupling Capacitance
DG Galvanic Isolation
Break Down Strenght
Frequency
Load Regulation
Cooling
Class Insulation
Lamination
Copper 
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
415 Volts Nominal Three Phase

415 Volts Nominal Three Phase
Delta/Star
1:1
DYN 1:1
100db
012PF
1000 M-Ohm
2500VAC for 2 minutes
47to53 Hz
3-5%
ONAN or Air
F
CRGO
99.9% Pure

Friday 20 January 2012

Current Transformers

 At Eldee, We believe that our clients deserve products which stand for quatity and performance.Hence, while manufacturing our range of instrument transformers at state of the art facilities,we ensure that the performance levels of our products are best in the industry.whe Pn our clients choose Eldee, they are assured enough to focus on their business, and not worry about the products their business uses.
Choose Eldee for the total satisfaction.




 

Eldee Products Range:-
» Current and Potential Transformers from 0.66KV to 132 KV
» Combined CT-PT Unit (Outdoor and Indoor)
» Dry Type Resin Cast P.T.s
» Dry Type Resin Cast and P.T.s
» Interposing C.T.s and P.T.s
» Summation C.T.s
» Auxiliary C.T.s
Contact Us
L.D.Power Transformers Pvt.Ltd.
Manufacturers of Servo Voltage Stabilizers & Transformers
A-9,Sector 59 , Noida (India).
Fax No : 0120-4248043
T :0120-2586500 , 2580934
Email : ldpower@rediffmail.com

Sunday 15 January 2012

Servo Voltage Stabilizer

Continuous stable supply of A.C Power is the life line of any sophisticated electronic and electrical system. The performance of these instruments is optimum at the rated voltage. Under voltage generally reduces efficiency,and very low voltage even can force the system to shut down. High voltage shortens the life and even can burn the instruments. ELDEE Servo Voltage stabilizers receive fluctuating AC Voltage of wide range and delivers constant output voltage with ± 1% of the nominal voltage ; it is therefore an excellent remedy for the problems of wide voltage fluctuation.The efficiency is maintained as high as 98-99%.The output voltage stability of our servo stabilizer allows the optimum drawing of the current by the connected load and as such no extra power is consumed at low as well at high voltage.This therefore saves electric power to approximately 20% and reduces MDI(Monthly Demand Index).

SVS (servo voltage stabilizer) basically comprises of Auto Transformer (Dimmer State/Roller Contact type) coupled with A.C.Servo Motor, Buck Bust transformer Control card for regulation All these components are interconnected adequately to accomplish the work of stabilization of output voltage of SVS. Use of reliable high quality components alongwith microprocessor controlled circuitry ensures the operation of our Servo Stabilizers flawless.

Contact Us
L.D.Power Transformers Pvt.Ltd.
Manufacturers of Servo Voltage Stabilizers & Transformers
A-9,Sector 59 , Noida (India).
Fax No : 0120-4248043
T :0120-2586500 , 2580934
Email : ldpower@rediffmail.com

Thursday 12 January 2012

Vertical Rolling Contact Voltage Regulator

 Roller Contact Type Servo Voltage Stabilizer is similar in function as dimmer stat type servo stabilizer.It has essentially auto wound single layer helical coil with rectangular copper strip of appropriate size wound on the laminated core. The spring loaded carbon roller travels the vertical length of the coil track with the help of servo AC motor.The control circuitry sense the output and error signal in norminal output voltage is amplified and controls the servo motor which drives the roller mechanism which in turn sets the nominal output voltage to with an 1% stability. Referred figure.









Accessories :
(a) Step down transformer,double wound star / delta connected
(b) Buck boost,double,wound transformer
(c) Auto wound delta connected "ON" Load step less rolling contact type voltage regulator
(d) Automotive Control unit consisting of:
(i) One elecric voltage relay.
(ii) One reversing gerared motor unit .
(iii) Two limit switches in order to avoid overrunning highest and lower positions.
(iv) chain drive,coupling device and all electrical connection.
Contact Us
L.D.Power Transformers Pvt.Ltd.
Manufacturers of Servo Voltage Stabilizers & Transformers
A-9,Sector 59 , Noida (India).
Fax No : 0120-4248043
T :0120-2586500 , 2580934
Email : ldpower@rediffmail.com

Friday 6 January 2012

solation Transformers

Any transformer,single or three phase in which primary and secondary are separately wound (double wound) is an isolation transformer as primary and secondary are internally isolated from each other.The power transfer at rated frequency is by transformer action through mutual inductance. The Modern machines and systems need a truly is olated clean power in which any electrical disturbance in the priary side is effectively not passed on to secondary side.
Therefore an Isolation/Ultra Isolation transformer ensures total electrical and electro satatic isolation local neutral and dedicated earth which are very essential for modern machines.It provides noise or interference free power and prevents transfer & RF and HF disturbances with extensive isolation between primary and secondary.The isolation level with stand HV break down strength of 2.5KV and gives DC galvanic isolation of more than 1000M Ohms.

Contact Us
L.D.Power Transformers Pvt.Ltd.
Manufacturers of Servo Voltage Stabilizers & Transformers
A-9,Sector 59 , Noida (India).
Fax No : 0120-4248043
T :0120-2586500 , 2580934
Email : ldpower@rediffmail.com

Thursday 5 January 2012

HT AVR

ELDEE makes Transformers with built-in HT Automatic Voltage Regulator is a revolutionary Landmark in the Industry when it comes to voltage Regulation and Stabilization.Even after the installation of standard distribution transformers the problme of Low / High Voltage on the LT site remains,resulting in improper operation of the electrical machines of a plant.The standard off-circuit tappings of the transformers can correct limited voltage variations and cannot regulate the voltage while in 'on load' condition.Thus,the R&D team at ELDEE developed a smart" way of tackling the problem with Transformers having Built-in HT Automatic Voltage Regulator that operates on load,steplessly.
The equipment is basically a combination of HT AVR with a standard distribution Transformer.The fluctuating voltage from'Grid'is initially stabilized by the HT AVR and then fed to the transformer resulting in the constant L.T. Output within + 1% accuracyand the Biggest advantage being the robust design of the equipment which does not demand regular maintenance.
Advantages of transformer with built in HTAVR :
• Better Efficiency
• Reduced Installation Cost
• Space Saving
• Energy Saving     • Protection of Motors
• Reduction in Electricity Bill
• Low replacement cost

Specification :
•  Capacity : Upto 5000KVA
•  Input Voltage : 8.5 KV=12 KV =3Phase
•  Output Voltage : 11KV + 1% - HT -3Phase
    415 + 1% - LT - 3Phase

Technical Advantages of ELDEE Voltage Regulators :
•  Low replacement cost
•  Undistorted output characteristics i.e. no wave from distortion.
•  No Moving Parts On L.T.site and it's mass is extremely low.
•  Energy Saving

•  High efficiency (approx.99%) and minimum no-load losses.
•  Simplicity and Flexibility of design.
•  On load stepless Voltage Variation
•  Long service life
•  Impulse Tested
•  Regulating coils are wound with rectangular conductors on their edge,thus giving high mechanical strength compared to other designs.

Contact Us
L.D.Power Transformers Pvt.Ltd.
Manufacturers of Servo Voltage Stabilizers & Transformers
A-9,Sector 59 , Noida (India).
Fax No : 0120-4248043
T :0120-2586500 , 2580934
Email : ldpower@rediffmail.com

Wednesday 4 January 2012

Distribution Transformers


 
 
ELDEE manufactures a wide range of distribution and power transformers ranging from 10KVA to 5000KVA with voltage class upto 33 KV.These transformers can be free breathing or hermetically sealed. Conventional transformers are fitted with a conservator with breather for free breathing while hermetically sealed ftransformers are totally maintenance free and are particularly suited for use in exposed outdoor environments such as moisture,salt or dust laden atmospheres. Ideal for chemical plants,oil and gas terminals where poor accessibility makes regular maintenance undesirable.both types can be supplied with HV and LV Switchgear incorporated into.substations.ELDEEmanufactures conventional/hermetically sealed/bolted type,indoor/outdoor type,pole/platform mounted 3 phase,50/60 Hz,oil immersed,ONAN/ONAF/OFWF cooled, step up/step down,double wound with A1/Cu conductor.Optimum design for reliability, accuracy,low losses,specified performance characteristic such as impedance,temperature rise,efficiency, noise level and ability to withstand the thermal and dynamic effects of short circuits,lighting and switching surge are enxured.
Specifications :
  Range : Upto 5MVA upto 33KV Class * Phase : Three Phase * Cooling : NOAN * Frequency : 50 Hz
  Tapping : (a) Offcircuit tap changer to provide +5% to-10% taps in steps of 2.5% (b) On Load tap changer to provide + 7% to -20% taps in step of 1.75%
  Vector group : DYN 11 * Duty Cycle : Continuous * HV Side Cable Box,LV Side Cable Box/Bus Duct
  Core : The core is constructed from low loss,cold-rolled,grain oriented, annealed lamination
  Copper : Electrolyte grade,99.9% pure
  Reference standard IEC/BS/ANSI/IS/NEEMA

Our transformers are tested as per IS 2026 and type tested by testing agencies CPRI,ERDA and RDSO.

The Technical specifications are given in Table and 2

Table 1 : Three Phase : 11/0.4333 KV,50HZ
Rating
KVA
NLL
(w)
FLL
(w)
%ZTemp. RiseTotal
Weight(Kg.)
OIL
(Liter)
Dimensions
LengthWidthHeight
25
63
100
200
315
630
990
1500
2000
80
180
260
500
1000
1300
1400
2100
2600
615
1235
1760
2800
4500
7500
11500
16000
20000
4.5
4.5
4.5
4.5
5
5
5
6.25
6.5
35/40
35/40
35/40
35/40
50/55
50/55
50/55
50/55
50/55
385
625
730
1000
1300
2450
3290
4550
4350
115
175
190
290
325
500
670
1050
850
910
1050
1180
1440
1800
2150
2350
3400
2650
700
930
850
1100
1450
1600
2250
2200
2500
1280
850
1425
1700
1850
2150
2400
2800
2600


Table 2 : Three Phase : 33/0.4333 KV,50HZ
Rating
KVA
NLL
(w)
FLL
(w)
%ZTemp. RiseTotal
Weight(Kg.)
OIL
(Liter)
Dimensions
LengthWidthHeight
990
1500
2000
2500
1800
2200
2950
3600
13000
16500
21500
26000
5.5
6.25
6.25
6.5
50/55
50/55
50/55
50/55
3700
5350
6150
9100
865
1100
1350
2700
2550
2450
2550
3000
2375
3200
3550
2800
2550
2900
2900
3000

Welcome to L.D.Transformers

OUR MISSION
* Through quality assurance and stringent evaluations, provide our customers with   accurate data, quality products and consistency in services.

* Develop and maintain a supplier/customer relationship based on open communication,   mutual trust and respect.
OUR VISION
* To increase our knowledge and capabilities as a service provider in the transforners   and generators.
* To become the global supplier/provider of choice who provide the quality products and   services preferred by our customers.
VALUE ADDED GOALS
* Customer Service and Support
* Continued Quality Improvements
* Leadership and Professional Growth
* Innovation and Resource Managers
Competitive prices quality products and services.
Contact Us

L.D.Power Transformers Pvt.Ltd.
Manufacturers of Servo Voltage Stabilizers & Transformers
A-9,Sector 59 , Noida (India).
Fax No : 0120-4248043
T :0120-2586500 , 2580934
Email : ldpower@rediffmail.com